Are LED Lights Right For Your Next Project?

In a time where so much importance has been placed on “Going Green,” LED lights seem like the natural energy efficient and “Green” choice to make when you are replacing your old bulbs and/or are starting a new project from scratch.

Earlier this month, BUILDINGS published an article that might make you reconsider using LED lights for every single green project/retrofit that you undertake.

Please take a moment to read BUILDINGS’ article and tell us what you think!

 

12/01/2011

LEDs: When and Where?

Avoid project pitfalls by understanding LED limitations

By Janelle Penny

The directional properties of LEDs and their affinity for cool climates have allowed the technology to expand into a wide spectrum of applications, from parking lots to indoor uses.

Not all applications are completely LED-ready, but there are several instances where you can reap considerable energy and cost savings from the reduced maintenance requirements and energy-efficient function.

“Traffic signals are a perfect example. There certainly is energy savings, but the payback comes through maintenance, not having to get a guy out in the intersection in a cherry picker and shut the street down,” explains Ron Steen, vice president of business development for solid state lighting developer Xicato.

WHEN TO RECONSIDER
Despite their rapid growth in popularity, LEDs aren’t always the answer for some applications. HID, which still boasts high efficiency, is frequently the best choice for roadway lighting and very high ceilings that require large amounts of light, says Jeff Spencer, director of commercial product management for Juno Lighting Group by Schneider Electric.

Induction lighting is another ultra-efficient option, though their lifespan (frequently rated around twice that of a comparable LED fixture) is balanced out by a price tag that’s cost-prohibitive for many budgets.

Ideal Opportunities for LEDs

To determine whether your next renovation or remodeling project could benefit from LEDs, consider these factors:

  • What temperature will the fixtures be exposed to? Early on, LEDs were suited only for cold climates due to their susceptibility for heat. Even today, high- heat applications can still pose a problem. “Over the furnaces in a steel mill is a pretty rough environment,” says Jeff Quinlan, vice president of technology for lighting manufacturer Acuity Brands. “We’ve put lots of LEDs in refrigerators and refrigerated warehouses, but LEDs are not good for ovens.”
  • How many hours will they run? LEDs gained popularity for parking lot lighting because their long-lasting capabilities led to fewer replacements. But think about places where you might use a single incandescent. “In a janitor’s closet, it’s not uncommon to see an incandescent light hanging off a pull string, and it’s on for 10 minutes a day,” Quinlan says. “It’s about delivering superior value from total cost of ownership. It’s hard to argue about a light that’s only used for a few minutes a day.”
  • How difficult are they to service? Because their location makes them difficult to access, atriums, extremely tall ceilings, and roadway lighting projects can all benefit from a reduced need for replacements.

 

“There are also some applications where the designer is looking for the ambiance they can get from the warm glow of a dimmed incandescent,” Spencer explains. “They like that the incandescent lamps get warmer when they dim, as opposed to staying the same color temperature with less light like LEDs.”

Retrofit projects may also pose a problem, depending on what type of fixture you’re trying to fit LEDs into.

“LEDs are still not viable replacements for fluorescents in troffers,” says Paul Ford, vice president of design engineering for The Lighting Quotient, an architectural lighting equipment manufacturer. “It hasn’t fulfilled expectations.”

WHAT TO WATCH FOR
Lighting developers are focusing on LEDs, OLEDs, and other relatively new technologies instead of improving traditional sources, Spencer says.

“One of the challenges end users need to consider today is how to know when it’s time to replace their LED sources,” Spencer says. “Since LEDs keep getting dimmer, it’s not as obvious when they’ve reached a light output level that’s too low for the application. We’re introducing a lumen depreciation indicator that will let the end user know when their fixture has reached 70% lumen maintenance.”

Expect lighting controls to become easier to install and more effective to use, Spencer adds. The demand for efficient, user-friendly lighting will only increase, and in the meantime, one basic rule of thumb will help you determine if you have the right lighting installed in a space.

“Lighting done right is invisible, regardless of what technology it uses,” says Michelle Murray, director of corporate communications for Cree. “If you walk into a well-lit space, you shouldn’t even notice what the light levels are or how the light is generated. If the light feels too dim, bright, uneven, or glary, the lighting design wasn’t done properly.”

 

Janelle Penny (janelle.penny@buildings.com) is associate editor of BUILDINGS.

 

Leave a Reply

Our website uses cookies to enhance your experience. To receive the best experience, please allow cookies.